NASIOL ZR53 – CERAMIC NANOCOATING FOR 9H BODY

Nasiol ZR53 is a high-quality protection of the painted car body against harmful environmental factors, such as: acid rain, bird droppings and direct UV rays, as well as dirt and scratches. Because surfaces covered with Nasiol ZR53 acquire waterproof properties, therefore your car the body will be extremely easy to maintain , and its surface shiny without any additional effort - as if fresh from a car showroom.

Unlike other ceramic coatings, Nasiol ZR53 nanocoating provides the body with double protection: the lower part of the layer provides softness to the car parts covered with it, and the upper layer ensures maximum resistance against environmental factors.

Nasiol ZR53 is safe to use on car bodywork, various other painted plastic parts and bumpers. Using this nanocoating according to instructions, Nasiol ZR53 vehicle surface protects up to 3 years .

In the package you will find:

• "Nasiol ZR53" tool bottle with lasiku dispenser,
• Nasiol applicator block,
• "Nasiol" chamois napkins, 5 pcs.,
• "Nasiol" microfiber cloth (light gray),
• "Nasiol" microfiber cloth (dark gray),
• nitrile gloves,
• Nasiol sticker
• user guide.

How to use?

• For best results, ensure that the environment in which the car will be coated is as close as possible to the recommended temperature and humidity: 5-30 ̊C and 50% relative humidity. If the ambient temperature or relative humidity is higher than recommended, the product may harden faster than specified by the manufacturer.
• It is best to perform the procedure in a place out of direct sunlight.
• Do not paint the car when its surface is warm or frozen.
• Wash the car thoroughly and gently. You can use automotive clay for this.
• Clean the car to remove any moisture.
• Depending on the surface of your vehicle, you can polish your car with a silicone- and wax-free product.
• After polishing, wash the car.
• Clean the parts of the car that you plan to apply the product. To prevent water dripping from the trim and joints, you can use a compressed air gun for drying.
• Prepare the surface of the car for coating. In order to improve the adhesion of the nanocoating, you can use the cleaner "Nasiol Clean".
• Dry the surface of the car. Do not use a lint-free cloth when drying.
• Work with an area of ​​no more than 1 m² at a time.
• When covering the car, wear the protective nitrile gloves that are included in the product box.
• Shake the bottle carefully before use. Cover the applicator block with a chamois napkin. Apply the recommended amount of product to the tissue to cover the affected area. 4-5 ml of product is enough for 1 m² area.
• Close the bottle to prevent exposure to air.
• Gently spread the product on the surface in a criss-cross motion.
• After covering an area of ​​3-4 m², replace the chamois cloth with a new one.
• After 30 s of product distribution, drops of product may appear on the surface, which should be wiped off in linear motions using a light gray Nasiol microfibre cloth.
• To get the most out of the cloth, fold each cloth into four parts and wipe the product on the opposite side of the cloth each time.
• If you delay in wiping off the excess product, the product may harden to the point where it cannot be dispersed. In this case, the product will have to be removed by polishing or grinding. After this procedure, the product will have to be re-applied.
• After cleaning the surface with a light gray microfiber cloth, polish the car using a dark gray Nasiol microfiber cloth. Use it to polish the surface of the vehicle in a circular motion.
• Surface covered with the product for 24 hours. keep away from direct sunlight, water, dust and other dirt.
• The first 48 hours do not wash the surface of the car with shampoo or detergents - let the nano coating harden and become resistant to friction and the effects of chemicals.