NASIOL XR03 – NANOCERAMIC COATING

Nasiol XR03 nanoceramic coating protects the car surface from scratches, acid rain, bird excrement, salt used for road cleaning and harmful sunlight. Also, this protective agent revives the original color of the surface and renews the appearance. The surface coated with Nasiol XR03 is waterproof and easier to clean.

Benefit:

• coating does not require any additional equipment - everything you will need is included in the package;
• effectiveness remains up to 18 months;
• water resistant;
• resistant to chemicals;
• especially shiny;
• recommended for professionals.

Suitable surfaces:

NASIOL XR03 is suitable for use on painted vehicle bodies, lights, rims, black plastic and other trim surfaces. Do not apply this product to unvarnished plastic parts, recently (up to 3 months) painted surfaces, low quality paint, glass, textiles, tires and absorbent surfaces.

How to use?

• For best results, ensure that the environment in which the car will be coated is as close to the recommended temperature and humidity as possible: 5˚C - 30˚C and 50% relative humidity.
• It is best to perform the procedure in a place out of direct sunlight.
• Do not paint the car when its surface is warm or frozen.
• Wash the car thoroughly and gently. You can use Nasiol Clean for this. If necessary, apply clay to the car.
• If desired, the car can be polished with a product without silicone and wax before the procedure.
• After polishing, wash the car again and wipe it to remove moisture from the surface. Do not use a lint-free cloth when drying.
• When covering the car, wear the protective nitrile gloves that are included in the product box.
• Shake the bottle carefully before use. Cover the sponge with a tissue and apply as much product as is recommended to cover the relevant area. 5-8 ml of the product is enough for 1 m². Close the bottle to prevent exposure to air.
• Cover an area of ​​no more than 1 m² at a time.
• After covering an area of ​​3-4 m², replace the napkin with a new one.
• Gently spread the product on the surface in a criss-cross motion. After 30 s of this step, product droplets may appear on the surface, which should be wiped off in linear motions using a Nasiol microfibre cloth.
• After wiping the surface, polish each section in a circular motion using the Nasiol microfiber cloth.
• Leave the product on the surface for 24 hours. During this time, protect the car from direct sunlight, water, dust and other pollutants.